The e3 Design Series™ retains all of the super-efficient e3 breakthrough heat pump system. These stylish heat pumps have an elegant, compact finish and include intelligent features that makes the series a leader in both form and function. They include human sensors, simple and intuitive controls and unique extra features to improve the comfort and health of your home lifestyle.
Slim and elegant design
The slim and elegant design is realised by the heat exchanger and high efficiency wind blower.
Human sensor, for more energy savings
When movement is not detected the energy save mode activates, and the capacity is reduced until the sensor detects human movement again.
20 minutes continuous operation by maximum airflow and maximum compressor speed is possible. Rapid cooling and heating makes the room comfortable quickly.
The economy mode will limit energy consumption (up to 30% of normal mode). Maintaining a slightly higher temperature in Cool Mode and lower temperature in Heat Mode, as well as limiting maximum current.
10°C Heat Operation
This function ensures the room temperature does not drop below 10°C. NB. If the room temperature is above 10°C the function does not need to start
Healthy air filters
Fujitsu’s advanced filter systems contribute to a fresher, cleaner and healthier living environment.
This smart, very thin and easy-to-use remote has a large LCD display and a one-touch button.
There are many new, unique features:
The e3 Series gives you 7-day ‘set-and-forget’ control, if you wish.
ON/OFF timer can be set four times per day, so you can set any program to suit your lifestyle.
20 minutes continuous ‘extra power’ boost, to give you rapid heating or cooling whenever you want it.Low noise mode for outdoor unit
The low noise button on the remote controller makes it easy to switch the outside unit to low noise.10°C HEAT operation
The room temperature can be set to go no lower than 10C, thus ensuring that the room never gets too cold when not occupied
This energy saving operation lowers power consumption by cutting the maximum current. It is selected with just one touch on your controller.
The set temperature is gradually stepped down to match your body’s requirements as you fall asleep, and then is automatically and gradually stepped back up before waking.
ALL Fujitsu Hi-Wall models are equipped with 4 fan speeds including quiet fan mode, allowing some of the indoor units to operate as low as 21 or 22 decibels (that’s quieter than a human whisper). In addition to this, Fujitsu’s fan technology means that our models are quieter even when working their hardest to quickly heat or cool a room. The e3Series also incorporates quiet mode on the outdoor unit.